The constructions we coat for UV-cured inkjet presses — Durst, Domino, Xeikon, Handtop and similar platforms. Every sheet states the face material, adhesive system, liner and the values we actually measured on the bench.
UV inks are 100% solids and cure in milliseconds, so the ink never has time to settle into an untreated surface. Our top coating holds the surface energy at 38–42 dyne/cm — high enough for the droplet to anchor, controlled enough that it will not bleed into the next dot.
Loop tack, peel adhesion and shear in every sheet are measured on calibrated instruments to FTM / ISO methods against stainless steel. Where a figure is a typical value we say so; we do not quote best-case numbers as specifications.
Nameplates and industrial markings, colour short-run labels, and any application that has to survive solvent wiping or abrasion. The family also covers white and clear film faces for durable-goods labelling.
| Model | Face material | Adhesive | Peel / Tack | Service temp. | File | Actions |
|---|
Ink laydown and press speed set how fast a droplet must be absorbed. Absorb it too quickly and the dot shrinks, the colour greys out and contrast collapses. Absorb it too slowly and neighbouring droplets merge into a soft, over-gained edge. We match coat weight to your ink laydown and print speed instead of shipping one universal recipe.
| Parameter | Our control | Why it matters |
|---|---|---|
| Surface energy | 38–42 dyne/cm | Ink wets evenly without bleeding |
| Coat weight | Matched to ink laydown | Prevents dot gain and colour shift |
| Cure compatibility | LED + mercury UV tested | Adhesion without over-curing |
| Caliper tolerance | ±5 % | Stable register at press speed |
Give our engineers the substrate, the press and the service conditions. We coat candidates on the pilot line and send you the test data — NDA is routine.
Enter your work e-mail — we send a 6-digit code straight away. The code stays valid for 10 minutes.
Sent to
Nothing in your inbox? Look in the spam / junk folder — then mark our e-mail as “not spam”.
The code is valid for 10 minutes and can be used once.