Our largest family: paper, thermal, PP, PE and PET constructions for flexo presses. This is where most shipping, logistics, food and volume labels in the catalogue are printed — and where getting the adhesive right matters most.
Curved surfaces such as bottles, tubes and small-diameter vials need a soft face and high initial tack so the label conforms without lifting at the edges. Rough, dusty or condensation-wet surfaces need a heavier adhesive coat to reach the substrate at all.
Our sheets distinguish permanent acrylic emulsion, hot-melt and removable grades. Hot-melt gives the highest initial tack at the lowest cost but has a narrower temperature window; acrylic emulsion trades some tack for UV, ageing and low-temperature performance.
Die-cutting, matrix stripping and register stability all depend on face stiffness and the release force between face and liner. A material that runs cleanly on one press can flutter on another at a different web speed.
| Model | Face material | Adhesive | Peel / Tack | Service temp. | File | Actions |
|---|
The release force between the face and the liner sets the usable tension window. Too high and the web drags, the register drifts and the die-cut position wanders at speed. Too low and the label lifts before it ever reaches the die. We publish the release force on the sheet so your converter can match it to unwind speed rather than guessing.
| Parameter | Our control | Why it matters |
|---|---|---|
| Release force | Tuned to unwind speed | No web flutter at high speed |
| Stiffness | Matched to die-cutting | Clean matrix stripping |
| Caliper tolerance | ±5 % | Repeatable register |
| Adhesive | Permanent / hot-melt / removable | Right bond for the surface |
Give our engineers the substrate, the press and the service conditions. We coat candidates on the pilot line and send you the test data — NDA is routine.
Enter your work e-mail — we send a 6-digit code straight away. The code stays valid for 10 minutes.
Sent to
Nothing in your inbox? Look in the spam / junk folder — then mark our e-mail as “not spam”.
The code is valid for 10 minutes and can be used once.